How one can Set up a Kegerator Conversion Equipment

The right do-it-yourself challenge for a draft beer fanatic is constructing their very own kegerator.

Nothing beats the pleasure of getting a chilly beer within the consolation of your individual residence. That is why we now have a wide array of ready-built kegerators. Nonetheless, for individuals who benefit from the DIY strategy, our information may also help you flip a daily fridge right into a kegerator. With solely primary instruments, a fridge, and a kegerator conversion equipment, you may have a do-it-yourself kegerator and luxuriate in scrumptious draft beer very quickly!

How one can construct a kegerator utilizing a conversion equipment

Obtain Directions

Deciding on your fridge and kegerator elements

To start out your DIY kegerator challenge, you’ll need a fridge, draft beer elements, and instruments to put in them.

When constructing a DIY kegerator, the best-sized fridge to make use of is a full kitchen fridge with a freezer on high. Nonetheless, any fridge can be utilized so long as it suits a keg, plus roughly 6-8 inches of clearance above it to suit the coupler. Additionally, you will wish to account for room to have the ability to faucet and untap your kegs. If you happen to’re restricted on area, think about using a low-profile keg coupler. An ordinary US Sankey Keg Coupler is 3 & 3/4″ tall and seven” huge, whereas a Low Profile US Sankey Keg Coupler is 2 & 1/8″ tall and 4″ huge, providing you with further clearance in a fridge with restricted area.

Do not forget that beer kegs come in several styles and sizes, so make certain the beer you wish to serve on faucet is available in a keg that may match inside your fridge. Reference the graphic beneath and take a look at our Information to Beer Keg Sizes to study extra in regards to the out there kinds of kegs.

Fortunately you will have come to the fitting place to choose up draft beer elements wanted for constructing a kegerator. KegWorks carries a number of kegerator conversion kits that may offer you every little thing you want primarily based on the kind of beer you wish to serve and what number of beers you wish to have on faucet. For the extra skilled customers, we suggest our customized kits that permit you to choose the elements you should get precisely what you need.

One factor to recollect when choosing your equipment and/or elements is that totally different manufacturers of beers or imported beers could require totally different keg couplers. A US Sankey Keg Coupler will match 99% of all beers brewed in North America. Try our keg coupler record for extra info on which couplers are appropriate with which beer kinds.

Need to pour Guinness or different nitrogen stouts? You’ll be able to adapt your conversion equipment with a Partial Murphy’s Conversion Equipment and a nitrogen tank. And if you realize you solely wish to pour nitro stouts, the Guinness Kegerator Conversion Equipment is a less complicated setup. Be taught extra about pouring Guinness on faucet in our Guinness on Faucet Information.

Suppose you are trying to pour your individual homebrews. In that case, our Homebrew Kegerator Conversion Equipment is specifically designed with Cornelius keg elements to make connecting and disconnecting your corny kegs fast and straightforward.

This information demonstrates learn how to set up a single faucet conversion equipment, which is the most well-liked choice for changing a fridge right into a keg fridge. Nonetheless, there are different choices, together with double faucet conversion kits and tower conversion kits.

Double Faucet Conversion Kits

If you wish to serve two kegs, a double faucet conversion equipment is your reply. Keep in mind, you’ll want room contained in the fridge to accommodate each kegs for correct meting out.

Tower Conversion Kits

A tower conversion equipment is a superb choice in case you are utilizing a chest freezer on your kegerator construct (generally often called a “keezer”). It attaches to the highest of the freezer and might accommodate a number of taps for pouring quite a lot of beers. (Professional tip: Constructing a keezer requires an exterior temperature management unit to make sure the temperature inside it doesn’t fall beneath freezing.) A tower conversion equipment can be generally used to improve or refurbish a purpose-built kegerator.

See our full record of Kegerator Conversion Kits

Instruments you will want for constructing a DIY kegerator

You will want the next instruments to put in and join the draft beer elements on your kegerator:

• 7/8″ Gap Noticed
• Energy Drill
• Flathead Screwdriver
• Spanner Wrench
• Hex Wrench

Step 1: Drill the specified location

Be sure the fridge is unplugged. With an influence drill and gap noticed, drill a 7/8″ gap within the door or sidewall of your fridge for the tap and shank; don’t drill into the again wall of the fridge. Test the within of the door to make certain you will have clearance on your shank. Additionally, guarantee you will have sufficient distance from the freezer door to open it up with out hitting the faucet deal with. Lastly, be sure you noticed throughout the door and the plastic liner on the within of the door.

Step 2: Connecting the tap and shank

Insert the shank by the opening you simply drilled (from the surface) and safe it with a brass flanged lock nut; the black plastic flange goes on the surface to assist cowl up the opening you made.

Connect the tap head to the shank and tighten it with a spanner wrench.

Step 3: Connecting the beer and air strains

Connect the beer line hex connections to the again of the shank and the highest of the keg coupler.

Connect one finish of the air line to the nipple on the coupler and the opposite onto the regulator.

Tighten the hose clamps with a flathead screwdriver.

Then connect the regulator to your CO2 tank and tighten it with a hex wrench.

Please Word: our CO2 tanks ship empty resulting from federal rules. You may get them crammed at a neighborhood welding provide firm.

Step 4: Ultimate connections and changes

Guarantee the tap and regulator swap are within the “off” place.

Open the CO2 tank and fix your keg coupler.

Alter your regulator to a variety of 10-12 psi.

Then flip it on to permit the move of CO2 to your keg.

At all times be sure you stand your CO2 tank upright.

Step 5: Drink!

Benefit from the fruits of your labor by pouring your self a tall and attractive pint!

Suggestions for brand spanking new kegerator house owners:

1. Draft beer needs to be saved and distributed at 36-40 levels Fahrenheit. Retaining a thermometer contained in the fridge is all the time a good suggestion.
2. In case your keg has been dealt with an important deal or has warmed up, it could take a number of hours to calm down and funky earlier than pouring. So be sure you give your beer time to relaxation.
3. Open the beer faucet rapidly and totally. Opening the tap midway will trigger foam. As soon as you have crammed the glass, shut the tap rapidly.
4. When pouring, we recommend that you simply tilt the glass barely to pour it gently down the aspect of the glass. For extra tips about meting out, take a look at our weblog submit on How one can Pour a Good Pint.
5. Hold your beer system clear! We suggest flushing your draft strains with a superb rinse everytime you change your keg. That is the simplest approach to make sure you pour nothing however crisp, tasty beer. Fill up on beer line cleansing provides and kits right here.

If you happen to nonetheless have questions on learn how to construct or preserve your kegerator, go away them within the feedback, or please name us at 877.636.3673 anytime Monday-Friday between 9 a.m. – 5 p.m. EST.

Able to make your fridge right into a kegerator? Store Kegerator Conversion Kits